replacement wheels for weber summit grill 450 (2025)

16" x 6" Hub-piloted wheel has a 4.88" pilot diameter. ±5.35" Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup. Acrylic enamel finish ...
e-coat primer layer. Compared to powder coat finishes, this finish resists getting chipped from flying road debris or scraped from hitting a curb for a longer period of time. These acrylic enamel wheels

• 16 Inch
• Wheel Only
• 8 on 6-1/2 Inch
• Dual Wheels
• Steel Wheels - Acrylic Enamel
• Taskmaster

Silver power coated, 16" steel dual trailer wheel with 5-1/2" offset features an 8 on 6-1/2 bolt pattern and meets Department of Transportation standards, in inches, of the circle on which the bolt holes sit. To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway

• 16 Inch
• Wheel Only
• 8 on 6-1/2 Inch
• Steel Wheels - Powder Coat
• Dual Wheels
• Dexstar

Bias tire has a ply rating of 6 and a 1,760-lb maximum load at 50 psi. The 14" diameter x 6" wide steel trailer wheel features a 5 on 4-1/2 bolt pattern and a corrosion-resistant galvanized ...
guarantee. If within the first 12 months the tire is damaged in any way, it will be replaced at no charge. Bias Tires vs. Radial Tires Bias ply tires are designed for off-road or agricultural applications

• 14 Inch
• Tire with Wheel
• 5 on 4-1/2 Inch
• 205/75-14
• Load Range C
• Steel Wheels - Galvanized
• Bias Ply Tire
• Kenda

Radial tire has 6-ply rating and 1,360-lb max load at 50 psi. 13" x 4-1/2" Steel wheel has 5 on 4-1/2 bolt pattern. 1-Year No Excuses Guarantee on tire. Complimentary roadside assistance ...
mounting the replacement tire. Steel Lug Nut Inserts This aluminum wheel comes with steel inserts in the lug nut wells. The inserts are pressed into the aluminum, and they help prevent the holes from wearing

• 13 Inch
• Tire with Wheel
• 5 on 4-1/2 Inch
• 175/80-13
• Load Range C
• Steel Wheels - Powder Coat
• Radial Tire
• Westlake

Radial tire with automotive-grade tread has a 14-ply rating and a 4,080-lb maximum load at 110 psi. Complimentary roadside assistance included. Assembly is match mounted and balanced providing longevity and a smooth ride.Features: Tire-and-wheel assembly is ideal for RVs, campers, and trailers Match mounted and balanced for longevity and a smooth ride Reduces vibration and the wear and tear it can cause Aluminum

• 16 Inch
• Tire with Wheel
• 8 on 6-1/2 Inch
• 235/80-16
• Load Range G
• Aluminum Wheels
• Radial Tire
• Taskmaster

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look. Maximum gross trailer weight : 4,000 lbs Maximum GTW when used with weight distribution: 4,500 lbs Maximum tongue weight : 400 lbs Maximum TW when used with weight distribution: 450 lbs Limited lifetime

• 4500 lbs WD GTW
• Custom Fit Hitch
• 450 lbs WD TW
• 4000 lbs GTW
• 400 lbs TW
• Concealed Cross Tube
• Class III
• etrailer

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.Features: Custom fit is designed specifically for your vehicle Precision, robotic welding maximizes strength and improves fit Bolt-on installation - no welding required Complete hardware kit and

• 4500 lbs WD GTW
• Custom Fit Hitch
• 450 lbs WD TW
• 4000 lbs GTW
• 400 lbs TW
• Concealed Cross Tube
• Class III
• CURT

This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust. rust protection Meets SAE J684 towing safety regulations Made in the USA Specs: Receiver opening: 2" x 2" Maximum gross trailer weight : 3,000 lbs Maximum tongue weight : 450 lbs Not rated for

• Custom Fit Hitch
• 3000 lbs GTW
• 450 lbs TW
• EcoHitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. support from the experts at etrailer.com Black powder coat finish covers e-coat base for superior rust protection Integrated mounting point lets you attach a bracket for a 4-way or 7-way plug (sold

• 4500 lbs WD GTW
• Custom Fit Hitch
• 450 lbs WD TW
• 4500 lbs GTW
• 400 lbs TW
• Concealed Cross Tube
• Class III
• Draw-Tite

This completely hidden, custom-fit hitch installs behind your vehicle's rear bumper so that the cross tube is always out of sight. Receiver easily removes when not in use. Stainless steel receiver resists corrosion.Features: Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle Hidden design - hitch is completely out of sight for a clean, from-the-factory look

• Custom Fit Hitch
• 4500 lbs GTW
• 450 lbs TW
• Completely Hidden
• Class III
• EcoHitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. support from the experts at etrailer.com Black powder coat finish covers e-coat base for superior rust protection Sturdy, square-tube design Ball mount, pin and clip sold separately Specs: Receiver opening

• 4500 lbs WD GTW
• Custom Fit Hitch
• 450 lbs WD TW
• 4000 lbs GTW
• 400 lbs TW
• Concealed Cross Tube
• Class III
• Draw-Tite

This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible. Aluminum and steel alloy construction is durable and eco-friendly. Stainless steel receiver resists corrosion.; Rating: Class III Maximum gross trailer weight : 3,000 lbs Maximum tongue weight : 450 lbs Not rated for weight distribution systems Limited lifetime warranty Hidden Cross Tube for a Clean, Factory Look

• Custom Fit Hitch
• 3000 lbs GTW
• 450 lbs TW
• Completely Hidden
• Class III
• EcoHitch

This completely hidden, custom-fit hitch installs behind your vehicle's rear bumper so that the cross tube is always out of sight. Rustproof stainless steel receiver easily removes when not in use. 450 lbs Not rated for weight distribution systems Limited lifetime warranty Hidden Design for a Clean, Factory Look The EcoHitch Stealth trailer hitch is designed to be completely out of sight when

• Custom Fit Hitch
• 3000 lbs GTW
• 450 lbs TW
• Completely Hidden
• Class III
• EcoHitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. weight : 4,500 lbs Maximum tongue weight : 450 lbs Not rated for use with weight distribution systems Limited lifetime warranty Draw-Tite Tested Tough Draw-Tite's Tested Tough program provides testing

• Custom Fit Hitch
• 4500 lbs GTW
• 450 lbs TW
• Concealed Cross Tube
• Class III
• Draw-Tite

This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust. tongue weight : 450 lbs Not rated for weight distribution systems Limited lifetime warranty Hidden Cross Tube for a Clean, Factory Look The EcoHitch Hidden trailer hitch is designed to be as inconspicuous

• Custom Fit Hitch
• 4500 lbs GTW
• 450 lbs TW
• Completely Hidden
• Class III
• EcoHitch

Custom brackets reduce the amount of drilling and time required to install your fifth-wheel trailer hitch. Hardware included. Base rails sold separately.Features: Custom brackets mount beneath your truck bed to provide attachment points for 5th-wheel rails Base rails (RP58058 - sold separately) sit in truck bed and allow installation of 5th-wheel

• 5th Wheel Hitch Rails
• Custom
• Brackets
• Reese

13" x 4-1/2" Trailer wheel has 5 on 4-1/2 bolt pattern. Aluminum wheel has a 5-spoke design in black machine finish. Steel inserts in lug nut wells secure wheel. inserts in lug nut wells help to keep wheel securely in place on trailer hub Prevent holes from wearing down Eliminate the need for constant retightening of lug nuts Valve stem is included Center cap sold

• 13 Inch
• Wheel Only
• 5 on 4-1/2 Inch
• Aluminum Wheels
• Lionshead

... ... necessary for mounting feet to your roof. These durabl ...
necessary for mounting feet to your roof. These durabl ...
vehicle's factory tracks or fixed mounting points Pair with 2 square crossbars and fit hooks (sold separately) to create a complete roof rack Base units secure feet to fit hooks Fit hooks bolt to tracks for

• Complete Roof Systems
• 2 Bars
• 42 Inch Bar Space
• Black
• Square Bars
• Inno

... ... necessary for mounting feet to your roof. These durabl ...
necessary for mounting feet to your roof. These durabl ...
complete roof rack Base units secure feet to fit hooks Fit hooks bolt to tracks for fixed mounting points Locking levers secure rack to roof 2 Keys included Snap-on covers protect base units when feet are

• Complete Roof Systems
• 2 Bars
• 42 Inch Bar Space
• Black
• Square Bars
• Inno

... ... necessary for mounting feet to your roof. These durabl ...
necessary for mounting feet to your roof. These durabl ...
complete roof rack Base units secure feet to fit hooks Fit hooks bolt to tracks for fixed mounting points Locking levers secure rack to roof 2 Keys included Snap-on covers protect base units when feet are

• Complete Roof Systems
• 2 Bars
• 42 Inch Bar Space
• Black
• Square Bars
• Inno

Replace a caster wheel for your Ultra-Fab manual trailer jack. Works with 2" jacks (49-954030 and 49-954032). Tough plastic wheel has nylon bearings, and the steel housing has a powder coated ...
Features: Replace a caster wheel for your Ultra-Fab manual trailer jack 1-3/4" Diameter works with 2" jacks (49-954030 and 49-954032) Wheel is constructed of a tough plastic Wheel housing

• Wheel w Caster Assembly
• Camper Jacks
• Trailer Jack
• Jack Wheel
• Ultra-Fab Products

Caster attaches to a 2" jack inner tube to make it easier to move your trailer. Easily removes for travel. Reduces jack's overall capacity to 1,200 lbs.Features: Removable jack caster provides light support and makes it easier to move your trailer Polyolefin construction is durable and long-lasting Clear zinc finish on wheel bracket provides

• Wheel w Caster Assembly
• Camper Jacks
• Trailer Jack
• 6 Inch Wheel
• Jack Wheel
• etrailer

• Custom Fit Hitch
• 17000 lbs GTW
• 1700 lbs TW
• Visible Cross Tube
• Class V
• Buyers Products

... necessary for mounting feet to your roof.

• Fit Kits
• 4 Pack
• Inno